Important Tips for Optimal Performance of Your System

  • Spray systems must be clean for optimal performance.  Never run your system without the filter properly connected to the power unit. This may cause damage to your pump and spray nozzles. The filter should be cleaned after each hunt. This is especially important if hunting in dirty water. Your filter may be easily cleaned by unscrewing the cover over the filter, removing the wire mesh screen, and flushing with water.
  • Moisture can collect inside your power unit during use.  It is important to allow your unit to thoroughly dry prior to closing and storage.  This will prevent corrosion of the electrical components.
  • Periodically charge your lithium battery during the off season for optimal battery life.
  • If you are hunting in extremely cold conditions; after removing your unit from the water, quickly cycle the pump on and off using your remote control to exhaust any water remaining in the pump to avoid freezing and damage to your unit.
  • Avoid stepping on push to connects on lure lines while in the pond to avoid damage.  Call us or visit the website to order replacements if necessary.
  • The seal on your power unit must be clean and free of debris to avoid sinking of the power unit.  Periodically wiping the seal with a rubber cleaner is suggested.